欢迎光临唐山天物彩板有限公司!

唐山天物彩板有限公司

咨询热线
13931586578
唐山天物彩板有限公司

热门关键词: 高耐候彩板| 氟碳彩板| PE聚酯彩板

台州彩涂板质量保障_台州彩涂板诚信经营_天物彩

彩涂板生产厂家将介绍优质彩涂板的性能。当我们使用像彩涂板这样的产品时,我们都希望能买到质量和价格都非常合适的产品。但有时我们可能会被不法商家骗去购买一些劣质产品。如果是的话,什么产品是质量好的产品?
 
1。力学性能是衡量成形性的重要指标,是确定和调整加工工艺的重要参数。因此,在加工时应首先考虑。
 
2。铅笔硬度、T弯、冲击功等指标与加工性能密切相关,应予以充分考虑。
 
3。当零件形状复杂、变形程度较大时,应采用多道次成形。如果一次成型,涂层与基材之间的附着力可能因过度变形而受损。
 
4。加工时,应根据模具形状、变形特点、工艺条件等因素设置适当的间隙,并在设置间隙时考虑涂层厚度。
 
5。大多数涂层可用作固体润滑剂,满足大多数成形工艺的润滑要求。有些涂料通过调整配方可以提高涂料的润滑性。如果涂层的润滑性不够,可通过涂油、打蜡和可剥离保护膜覆盖来提高润滑性。
 
但应注意的是,湿润滑剂容易吸收污垢,安装前应将其清除。施工结束后,应尽快清除可剥保护膜。以上高品质产品的性能特点,希望客户在购买时一定要注意以上特点。

彩涂板生产厂家将介绍彩涂板运输中应注意的事项。现在想购买彩涂板的用户越来越多,在购买彩涂板后的运输中应该注意什么?让我们知道。
 
1。彩涂板采购后,采用专用吊带或软吊带装卸。产品按交货状态运输。垂直包装的钢卷在运输和装卸过程中也应保持垂直。
 
2。运输车辆的车厢应清洁,车厢底板应铺设橡胶垫或其他保护装置,车厢周围应采取必要的保护措施,防止包装起皱或碰撞。
 
3。彩涂板取出时不得拖拽,防止切割时产生的毛刺划伤下面的钢板。
 
4。彩涂产品应固定牢固,避免在运输过程中因相对移动或滚动而造成产品损坏或事故。
 
这些都是我们在购买彩涂板时需要注意的问题。
 The manufacturer of color coated boards will introduce the performance of good quality color coated boards. When we use products like color coated boards, we all hope to buy products with very suitable quality and price. But sometimes we may be cheated by illegal businesses to buy some inferior products. If so, what products are good quality products?
 
1. The mechanical property is an important index to measure the formability and an important parameter to determine and adjust the processing technology. Therefore, it should be considered first when processing.
 
2. Pencil hardness, T-bend, impact energy and other indexes are closely related to processing performance, so they should be fully considered.
 
Color coated board
 
3. When the shape of the parts is complex and the deformation degree is large, multi pass forming shall be adopted. If forming at one time, the adhesion between coating and substrate may be damaged due to excessive deformation.
 
4. During machining, appropriate clearance shall be set according to mold shape, deformation characteristics, process conditions and other factors, and the thickness of coating shall be taken into account when setting clearance.
 
5. Most coatings can be used as solid lubricants and meet the lubrication requirements of most forming processes. Some coatings can improve the lubricity of coatings by adjusting the formulation. If the lubricity of the coating is not enough, the lubricity can be improved by oiling, waxing and covering with peelable protective film.
 
However, it should be noted that wet lubricants are easy to absorb dirt and should be removed before installation. The peelable protective film shall also be removed as soon as possible after the construction. The performance characteristics of the above high-quality products, I hope that customers must pay attention to the above characteristics when purchasing.

The color coated plate manufacturers will introduce the matters that should be paid attention to in the transportation of color coated plates. Now there are more and more users who want to buy color coated plates, what should we pay attention to in the transportation after purchasing color coated plates? Let's get to know.
 
1. Special sling or soft sling shall be used for loading and unloading after purchasing color coated plate. The products shall be transported according to the state of delivery. The steel coil of vertical packaging shall also be kept vertical during transportation and loading and unloading.
 
Color coated board
 
2. The carriage of the transport vehicle shall be cleaned, rubber pad or other protective devices shall be laid on the bottom plate of the carriage, and necessary protective measures shall be taken around the carriage to prevent the package from creasing or bumping.
 
3. The color coated plate shall not be dragged when it is taken out, so as to prevent the burr generated during cutting and cutting from scratching the steel plate below.
 
4. Color coated products shall be fixed firmly to avoid product damage or accident caused by relative movement or rolling during transportation.
 
These are the questions we need to pay attention to when we want to buy color coated plates.